Відео

thanks

Will this amp work with electric guitar dist pedal? How will it sound ?? Btw... Does it have Bluetooth??

Bass is omnidirectional below around 250hz so regardless of whether your monitors are front ported or not low frequencies below 250hz will radiate all around, ask a professional sound engineer. I used to be a sound engineer myself. If you want evidence of what I said pull your monitors further away from the rear wall and you'll hear what I mean.

Just ordered them. I play on the guitar and planning to use it with BIAS FX. I hope it will work well together.

If you think the KRK RP 7 G4 is a large monitor imagine that i have a pair of KRK RP 10.3 G4 that one is large

What about just using the "acoustic" model on a Boss Katana? I'm actually a violinist using electric fiddle through the 2x12 Katana and it's the best amp I've ever played through. My acoustic guitars sounds great on that model obviously too.

Yamaha hs7 have a flatter response

It's a midbass not a subwoofer. The integral amps are rated for 140w, audio power, not constant power consumption. A flat speaker is one that doesn't impart coloration - flat compared to a reference tone: you know, plays what the signal is telling it to. And that's what studio monitors are meant to do. It's why the amp is built in - so that there's no coloration from multiple imbalanced components in the signal chain. Lastly, you don't need a mixer to use these. You can use TS cables and plug them right into the headphone jack on your Walkman (ok, so that tells you how long I've been around this stuff). You can't plug a line source device into them though, it needs a volume control somewhere before the internal amps.

This interface will make you mix quiet. Its clipped to fast. Dont use this

Awesome my friend@

Good video

Brilliant!!

yeah mine does this too. pos cheap interfaces.

They have a phone app to control the LCD room correction options.

Mmmmmm👍👍👍👍

Nice review. Both inputs should be XLR/Jack

Ant idea how to fix the terrible hissing sound from the studio monitors and the headphones connected to M-Track 2X2M?

Very well explained ... good job. Thanks a lot.

Great demo!

I have no hiss. I agree with you about the power buttons on the back and the settings interface on the rear too. Its fiddly. However, mine are super quiet. I use Presonus Studio 24c with these in a MacMini M1 setup. Kind of surprised you didn't go into the KRK app that helps you with what settings to use on the backs for optimal sound. Mine are Ice White. I have a very clean Power Circuit and make sure my speakers use a different circuit from the rest of the equipment plus they run on a conditioned surge protected quality powerstrip too. Nice video might have been nice to talk about how loud they can go, what settings you found yourself using etc.. but hey I suppose you can't have everything ;) Thanks for the video.

I had them, Tossed them after 1 year of light use. Crap parts = Crap build, Sounded ok. Replaced with Presonus, MUCH better quality speaker,

I sold my broken CR4s today for $30. They broke early on due to a common issue with the headphone switch buggering up.

Im a bedroom Dj and play electro only. Will i need a sub or will 2 x KRK 7 be enough ?

Hey bro. Love the review. Looking to build a neutral sounding system. About the hiss, have you considered active voltage regulation and power line conditioning? Love the look of your setup with the stands. Clean.

How does it do with acoustic guitar pickups I don't have an electric acoustic guitar with the integrated mics

Standby Your monitors have the ability to power down when you are not using them for 30 minutes. If you don’t want them doing that, you simply switch the standby feature off in the SETUP menu. But if you use standby to save energy or because the power switches are hard to reach in your studio, leave the standby on. You will know that they are in standby because the KRK logo will pulse (even if you normally have the KRK logo light off). To wake up your monitors after they go into standby. Just like when you first turn them on, there is a three second delay until the light on the front comes on and a second later you get signal to the speaker. If your speakers go into standby, ease your source volume up slowly. You only have to break -50 dBu for them to come out of standby. This will keep you from excessive volume spikes if you ease it up slowly. Also, as you raise the volume, you can use the light going solid as an indication to turn your source back down to avoid any loud spikes. Or if your setting is KRK logo light out, you can use the pulsing light going off to indicate you are about a second from the speaker coming on.

so stupid that it works!

Hi bro! For a bedroom studio producing edm, future rave, techno... RP5 or RP7 and why?

Call it average... Nice one !

Very Beautiful Melodies.....

Wonderful Cover....

Wonderful Guitar Playing....

Are they good for smaller rooms??

Still cliping

Bought because of the vocal harmonizing and looping….Unbelievable sound!!

Still the best value for today's age and got a replacement pads for only 6.5$, comfort improved alot but the sound was change alot (more wider and fun listening experience). So far im satisfied with these headphones, might try the m50x one day

These monitors are terrible. Awful sound and awful build quality. Stay away.

I have these same speakers with a 100 watt subwoofer. After setting everything up and listening to my mixes,they sound terrific. I have no apparent hiss noise from my speakers.... Grrr8 choice for studio monitors...!!!

Bravo Marko.... ma ja bi naveo i lokalnu valutu hehe . POZZ

Still buzzing

145watt per speaker, oh my electric bill'😁nice review!

I just boug ht one, but before seeing ur review. Not everyone is an expert on audio recording. It shall be helpful to many, if U could elaborate on the settings in the set

Svaka čast za ovaj review :)

The Fishman is pretty much the best I've used for both vocals and instrument.

I'm using a MacBook and I can't find steps that work 😭

Really cools kids, love it, well done.

I also have this problem on the M-Audio AIR 192/6, and from what I can see in the comments here I'm not alone. It's a real shame because otherwise I really like the unit. My old M-Audio Firewire 1814 does not have this issue, but unfortunately the drivers stopped at Windows 7 and also firewire connections are hard to find these days. I'll try this fix but if it persists I'll have to buy some other USB interface, probably something from Steinberg, since I use Cubase.

Are your ears not ringing my ears are ringing and has anyone gotten out of this I just switched to the classics and my ears are slowly going to normal Have you experienced anything like this

hi ,nice review. I have the same speakers .what type of monitor stands would you recomend ? since they are king of big its hard to find the right ones. thanks.

Such an easy fix, thanks man haha